Latest News

Welcome to Filtration Steve!

Steve Bourne has joined the sales team of Filtration Ltd. Steve worked for JAT his family owned filter business based in Bristol since he left school. JAT was sold to Baldwin, Who decided to close the Bristol operation in September this year.

Steve will be representing Filtration ltd, covering Bristol and the surrounding county's, he is looking forward to meeting the challenges that lay ahead but with the support of Filtration and their Product range we are sure he will be well equipped to meet them.

if you have been dealing with JAT and you need local product and support Contact Steve on 07887 857 234

Please note; It is an absolute requirement on a common rail fuel system when changing the fuel filter that the new filter is NOT pre-filled with fuel. The risk of contamination is huge. The correct procedure is to remove the protective film immediately before fitting the filter and screw on empty. Switch on ignition a and listen for the pump to run. When the pump stops running crank the motor until it fires. It is as simple as that.

Common rail fuel systems are incredibly sensitive to dirt, if guy's out there are servicing these motors pre filling fuel filters on common rail engines then seeing failures they are 90% responsible for any fuel system issues they create. A spec of crud just a little larger than 10 microns can take out an injector.